Recommended Project 6 - ATmega 128 Prototyping Board

  • Uses 64-pin ATmega128/1281/2561.
  • USB-serial interface via FTDI FT232RL.
  • Selectable power (USB/External/VTarget, external could be 5V or 3.3V).
  • Selectable clock source (crystal or clock from FT232RL).
  • All ports are avaiable at pinheaders.
  • Direct interface to GU300 Graphical VFD's.
  • Port D, E & F are laid out identical to the STK500.
  • Port A, C & G are in a single header, making it possible for future memory expansion.
Details can be found HERE


  1. good blog and good articeles...join whit me to exchange information AVR microcontroller..thanks

  2. join with me
    to exchange information AVR microcontroller